ILI9320 Colour Graphic LCD specific Declares.
Declare LCD_DTPort Port Assign the port that will output the 8-bit data to the graphic LCD.
There is no default setting for this Declare and it must be used within the BASIC program.
Declare LCD_WRPin Port.Pin Assigns the Port and Pin that the graphic LCD's WR line will attach to.
There is no default setting for this Declare and it must be used within the BASIC program.
Declare LCD_RDPin Port.Pin Assigns the Port and Pin that the graphic LCD's RD line will attach to.
There is no default setting for this Declare and it must be used within the BASIC program.
Declare LCD_CSPin Port.Pin Assigns the Port and Pin that the graphic LCD's CS line will attach to.
There is no default setting for this Declare and it must be used within the BASIC program.
Declare LCD_RSPin Port.Pin Assigns the Port and Pins that the graphic LCD's RS line will attach to.
There is no default setting for this Declare and it must be used within the BASIC program.
Declare LCD_RSTPin Port.Pin Assigns the Port and Pin that the graphic LCD's RST line will attach to.
The LCD’s RST (Reset) Declare is optional and if omitted from the BASIC code the compiler will not manipulate it. However, if not used as part of the interface, you must set the LCD’s RST pin high for normal operation.
