Positron Compiler Documentation

Cread8, Cread16, Cread24, Cread32, Cread64

Positron16 · Revision 1.1.3.5 · PDF pages 387–389

Assignment Variable = Cread8 Label [ Offset Variable ] or Assignment Variable = Cread16 Label [ Offset Variable ] or Assignment Variable = Cread24 Label [ Offset Variable ] or Assignment Variable = Cread32 Label [ Offset Variable ] or Assignment Variable = Cread64 Label [ Offset Variable ]

Read an 8, 16, 24, 32 or 64-bit value from a flash memory table using an offset of Offset Variable and place into Variable.

Cread8 will access 8-bit constant values from a flash memory table. Cread16 will access 16-bit constant values from a flash memory table. Cread24 will access 24-bit constant values from a flash memory table. Cread32 will access 32-bit constant values from a flash memory table, this also includes 32-bit floating point values. Cread64 will access 64-bit constant values from a flash memory table.

Assignment Variable is a user defined variable. Label is a label name given to the code memory table of which values will be read from. Offset Variable can be a constant value, variable, or expression that points to the location of interest within the code memory table.

Cread8 Example

' Extract the second value from within an 8-bit flash memory table
'
  Device = 24FJ64GA002           ' Select the device to compile for
  Declare Xtal = 16
  Declare Hserial_Baud = 9600     ' USART1 Baud rate
  Declare Hrsout1_Pin = PORTB.14  ' Select the pin for TX with USART1

  Dim Offset as Byte           ' Create a Byte size variable for the offset
  Dim MyResult as Byte        ' Create a Byte size variable to hold the result
'
' Create a flash memory table containing only 8-bit values
'
  Dim Byte_Table as Code = as Byte 100, 200

  RPOR7 = 3                   ' Make PPS Pin RP14 U1TX

  Offset = 1                  ' Point to second value in the flash memory table
'
' Read the 8-bit value pointed to by Offset
'
  MyResult = Cread8 Byte_Table[Offset]
  HrsoutLn Dec MyResult        ' Display the decimal result
View original PDF page 387Open page in PDFOriginal PDF page 387

Cread16 Example

' Extract the second value from within a 16-bit flash memory table
'
  Device = 24FJ64GA002           ' Select the device to compile for
  Declare Xtal = 16
  Declare Hserial_Baud = 9600     ' USART1 Baud rate
  Declare Hrsout1_Pin = PORTB.14  ' Select the pin for TX with USART1

  Dim Offset as Byte             ' Create a Byte size variable for the offset
  Dim MyResult as Word           ' Create a Word size variable to hold the result
'
' Create a flash memory table containing only 16-bit values
'
  Dim Word_Table as Code = as Word 1234, 5678

  RPOR7 = 3                      ' Make PPS Pin RP14 U1TX
  Offset = 1                    ' Point to the second value in the flash table
'
' Read the 16-bit value pointed to by Offset
'
  MyResult = Cread16 Word_Table[Offset]
  HrsoutLn Dec MyResult           ' Display the decimal result

Cread24 Example

' Extract the second value from within a 24-bit flash memory table
'
  Device = 24FJ64GA002           ' Select the device to compile for
  Declare Xtal = 16
  Declare Hserial_Baud = 9600     ' USART1 Baud rate
  Declare Hrsout1_Pin = PORTB.14  ' Select the pin for TX with USART1

  Dim Offset as Byte             ' Create a Byte size variable for the offset
  Dim MyResult as Dword           ' Create a Dword size variable to hold the result
'
' Create a flash memory table containing only 24-bit values
'
  Dim Long_Table as Code = as Long 12340, 56780

  RPOR7 = 3                       ' Make PPS Pin RP14 U1TX
  Offset = 1                    ' Point to the second value in the flash table
'
' Read the 24-bit value pointed to by Offset
'
  MyResult = Cread24 Long_Table[Offset]
  HrsoutLn Dec MyResult           ' Display the decimal result
View original PDF page 388Open page in PDFOriginal PDF page 388

Cread32 Example

' Extract the second value from within a 32-bit flash memory table
'
  Device = 24FJ64GA002           ' Select the device to compile for
  Declare Xtal = 16
  Declare Hserial_Baud = 9600     ' USART1 Baud rate
  Declare Hrsout1_Pin = PORTB.14  ' Select the pin for TX with USART1

  Dim Offset as Byte             ' Create a Byte size variable for the offset
  Dim MyResult as Dword           ' Create a Dword size variable to hold the result
'
' Create a flash memory table containing only 32-bit values
'
  Dim Dword_Table as Code = as Dword 12340, 56780

  RPOR7 = 3                       ' Make PPS Pin RP14 U1TX
  Offset = 1                    ' Point to the second value in the flash table
'
' Read the 32-bit value pointed to by Offset
'
  MyResult = Cread32 Dword_Table[Offset]
  HrsoutLn Dec MyResult           ' Display the decimal result

See also : Dim As Code, cPtr8, cPtr16, cPtr24, cPtr32, cPtr64.

View original PDF page 389Open page in PDFOriginal PDF page 389