Shin - Shout Declare.
Positron8 · Revision 4.0.6.5 · PDF page 439
Declare Shift_DelayUs = 0 - 65535 microseconds (us) Extend the active state of the shift clock.
The clock used by Shin and Shout runs at approximately 45KHz dependent on the oscillator. The active state is held for a minimum of 2 microseconds. By placing this declare in the program, the active state of the clock is extended by an additional number of microseconds up to 65535 (65.535 milliseconds) to slow down the clock rate.
If the Declare is not used in the program, then the default is a very small clock delay.
